[Hammarlund] SP-600 Knob and tag removal help!

[Brian Hill]

Hi guys . Another thing to remember is some of the tuning and band chg
shafts on SP-600s have a small machined grove area about 1/4 wide and 1/100
deep. Ive got stubborn allens out of these and still had the knob remain
stuck because material or junk catches on the grove. Sometimes they slide
back and forth just about to come off but don't! Just keep pulling they do
come off eventually. Don't lose hope! Its all you have at this point :)

P.S.I know you guys know this but No matter how stubborn it is be careful of
the bakelite skirt on those knobs. They break easy if pulled or pried on.
Pull on the knob not the skirt!

73 Brian Hill

Brian's Radio Universe
http://home.jps.net/~jonnysocko/