[Hammarlund] Than You Very Much!!

[James A. (Andy) Moorer]

----- Original Message -----
> I let it run for several days on a 600 ohm load
> and lost the output xfmr for some unknown reason.  Another friend gave me
an
> output xfmr.  I am hoping to open the bad xfmr and find a break at the
> terminal that I can repair.  The xfmr opened on the primary side.

I have seen this happen when C150 is open. Watch out - C150 is spec'ed at
800 V. I try to use 1000V or 1200V for replacement (if I can find any).

Another thing that can do this is if the AGC is broken and the output is
very hot (high amplitude). I have seen 150V across the 600-ohm load there if
the gain is not properly controlled.

James A. (Andy) Moorer
www.jamminpower.com