[Ham-Mac] flrig 2.0.02.10 posted at

[w1hkj]

http://www.w1hkj.com/alpha/flrig/


      Index of /alpha/flrig

  * Parent Directory <http://www.w1hkj.com/alpha/>
  * flrig-2.0.02.10.tar.gz
    <http://www.w1hkj.com/alpha/flrig/flrig-2.0.02.10.tar.gz>
  * flrig-2.0.02.10_VN.dmg
    <http://www.w1hkj.com/alpha/flrig/flrig-2.0.02.10_VN.dmg>
  * flrig-2.0.02.10_setup.exe
    <http://www.w1hkj.com/alpha/flrig/flrig-2.0.02.10_setup.exe>
  * flrig_users_manual.pdf
    <http://www.w1hkj.com/alpha/flrig/flrig_users_manual.pdf>
  * readme.dmg.txt <http://www.w1hkj.com/alpha/flrig/readme.dmg.txt>
  * readme.txt <http://www.w1hkj.com/alpha/flrig/readme.txt>

Author: Michael Black <mdblack98 at yahoo.com>
Date:   Fri Jul 28 02:28:55 2023 -0500

     ALC image

       * Add new ALC 40dB scale for PowerSDR

Author: dave-w1hkj <w1hkj at bellsouth.net>
Date:   Thu Jul 27 09:45:58 2023 -0500

     FTdx10 metering

       * add Idd and Vdd meterinig

Author: dave-w1hkj <w1hkj at bellsouth.net>
Date:   Sun Jul 23 18:50:48 2023 -0500

     IC9700

       * correct get_sat_mode

Author: dave-w1hkj <w1hkj at bellsouth.net>
Date:   Wed Jul 19 08:31:58 2023 -0500

     xmlrpc_rig

       * add ability to connect to an executing flrig anywhere on
         localhost, LAN, or WAN.
         . set address and port on "client" configuration tab
         . select "xmlrig" from serial port select control
         . only works with transceivers using serial streams for
           sending and receiving transceiver CAT data
         . uses target flrig xmlrpc interface commands
           rig.client_string
           rig.get_ptt
           rig.set_ptt
           rig.get_xcvr
           system.listMethods

73, David, W1HKJ