[Ham-Mac] flrig 2.0.03 posted

[w1hkj]

at http://www.w1hkj.com/files/flrig/


      Index of /files/flrig

  * Parent Directory <http://www.w1hkj.com/files/>
  * flrig-2.0.03.tar.gz
    <http://www.w1hkj.com/files/flrig/flrig-2.0.03.tar.gz>
  * flrig-2.0.03_VN.dmg
    <http://www.w1hkj.com/files/flrig/flrig-2.0.03_VN.dmg>
  * flrig-2.0.03_setup.exe
    <http://www.w1hkj.com/files/flrig/flrig-2.0.03_setup.exe>
  * flrig-help.pdf <http://www.w1hkj.com/files/flrig/flrig-help.pdf>
  * flrig-help.zip <http://www.w1hkj.com/files/flrig/flrig-help.zip>
  * flrig.txt <http://www.w1hkj.com/files/flrig/flrig.txt>
  * readme.dmg.txt <http://www.w1hkj.com/files/flrig/readme.dmg.txt>
  * readme.txt <http://www.w1hkj.com/files/flrig/readme.txt>

and at Source Forge <https://sourceforge.net/projects/fldigi/files/flrig/>.

     Version 2.0.03
     
       * maintenance release

     SmartSDR
     
       * add support for Flex SmartSDR

     ALC image
     
       * Add new ALC 40dB scale for PowerSDR

     FTdx10 metering
     
       * add Idd and Vdd meterinig

     IC9700
     
       * correct get_sat_mode

     xmlrpc_rig
     
       * add ability to connect to an executing flrig anywhere on
         localhost, LAN, or WAN.
         . set address and port on "client" configuration tab
         . select "xmlrig" from serial port select control
         . only works with transceivers using serial streams for
           sending and receiving transceiver CAT data
         . uses target flrig xmlrpc interface commands
           rig.client_string
           rig.get_ptt
           rig.set_ptt
           rig.get_xcvr
           system.listMethods


73, David, W1HKJ