[Ham-Mac] flrig 1.4.7.26 posted

[w1hkj]

at http://www.w1hkj.com/alpha/flrig/

	flrig-1.4.7.26.tar.gz 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.26.tar.gz> 	2022-09-26 
23:29 	1.0M 	
	flrig-1.4.7.26_BS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.26_BS.dmg> 	2022-09-26 
23:29 	3.9M 	
	flrig-1.4.7.26_HS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.26_HS.dmg> 	2022-09-26 
23:29 	2.3M 	
	flrig-1.4.7.26_LI.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.26_LI.dmg> 	2022-09-26 
23:29 	2.1M 	
	flrig-1.4.7.26_setup..> 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.26_setup.exe> 	2022-09-26 
23:29 	1.4M 	
	readme.dmg.txt <http://www.w1hkj.com/alpha/flrig/readme.dmg.txt> 
2022-09-26 23:29 	542 	
	readme.txt <http://www.w1hkj.com/alpha/flrig/readme.txt> 	2022-09-26 
23:29 	2.0K 	


The file "trace.txt" is being used to measure serial timing. You should 
include this file with any bug reports (after shutting down flrig-1.4.7.26).

Date:   Mon Sep 26 19:45:00 2022 -0600

     alpha

     message icon

       * test for void parent

     Extras

       * add hide tabs dialog if left open on shut down.

     PowerSDR bug

       * missing replystr length test
       * changed mingw implementation of Cserial::ReadBuffer method
         to read multiple characters, up to maximum requested, from
         the library function readfile(...)
       * changed timeout parameter in mingw Cserial::ReadBuffer method

     Serial i/o tuneup

       * remove unnecessary delays in serial i/o
       * change timeout processing for readbuffer
       * improved serial i/o tracing

     Trace macros

       * correct sett trace macro

     FTdx10 autostart

       * modify autostart method for reliable behavior

     pcr1000 mod

       * add change baud 9600 to 38400 immediately after startup

     serial-mods

       * changes to basic serial i/o class
         . added set_attributes and ability to change baud, DCR, DTR,
           CTSRTS and StopBits after port is opened
       * changed readbuffer loop to avoid cpu capture if user
         changes xcvr baudrate while connected to flrig, or serial
         port h/w fails (RFI or otherwise)

     combo

       * corrected sort method
       * additional changes to add method

     User Interface - Combobox fixes

       * Fixed several edge case behaviors with Combobox widgets

     (tr)uSDX

       * add backend class for (tr)uSDX transceiver

     ftdx10 notch

       * update to set/get notch ON/OFF/Value methods

     seg fault fix

       * in std::string printXCVR_STATE(XCVR_STATE data)

     Smeter/Freq poll

       * add poll inhibit for smeter and freq

     FTdx10

       * correct set notch logic
       * fix autostart
       * fix cw tone ON upon initial CAT start
       * enable date/time synch with PC

     IC7851

       * correct x25 x26 freq mode get/set CAT strings

     Add K4 transceiver

       * add transceiver class for Elecraft K4

     TS 590 S/SG AM data mode

       * add data mode

     Version 1.4.7

73, David, W1HKJ