[Ham-Mac] flrig-1.4.7.49 posted

[w1hkj]

at http://www.w1hkj.com/alpha/flrig/

  * flrig-1.4.7.49.tar.gz
    <http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.49.tar.gz>
  * flrig-1.4.7.49_BS.dmg
    <http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.49_BS.dmg>
  * flrig-1.4.7.49_HS.dmg
    <http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.49_HS.dmg>
  * flrig-1.4.7.49_LI.dmg
    <http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.49_LI.dmg>
  * flrig-1.4.7.49_setup.exe
    <http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.49_setup.exe>
  * flrig_users_manual.pdf
    <http://www.w1hkj.com/alpha/flrig/flrig_users_manual.pdf>
  * frequency-control-focus.png
    <http://www.w1hkj.com/alpha/flrig/frequency-control-focus.png>
  * frequency-control.png
    <http://www.w1hkj.com/alpha/flrig/frequency-control.png>
  * readme.dmg.txt <http://www.w1hkj.com/alpha/flrig/readme.dmg.txt>
  * readme.txt <http://www.w1hkj.com/alpha/flrig/readme.txt>

Three latest commits:

commit cbae1709edbee12a692950da295d3a900fbb8199
Author: dave-w1hkj <w1hkj at bellsouth.net>
Date:   Tue Nov 22 09:07:03 2022 -0600

     Xiegu rigs

       * correct smeter, swr meter conversions
         . G90, 5105

commit 05bd9ff4ac38ed76a333edfdb4ff2e740ffac425
Author: dave-w1hkj <w1hkj at bellsouth.net>
Date:   Tue Nov 22 09:19:55 2022 -0600

     FTdx1200 write delay

       * change default for FTdx1200 to 5 msec

commit b8067cb847e89c396c155eef4df6d9034f693851
Author: dave-w1hkj <w1hkj at bellsouth.net>
Date:   Mon Nov 21 18:16:33 2022 -0600

     FTdx10 FA/FB

       * change ascii string to long long int conversion

Refer to the readme.txt file for a complete commit history since Version 
1.4.7

This software is maintained and supported by a very small cadre of 
volunteers.  Please be sure to add as much detail as possible to problem 
reports.  Include operating system and version, interface specifics, 
configuration details, and both debug and trace files if available.  Be 
sure that you are using the correct transceiver selection for the actual 
hardware.  For example, one might assume that the FTdx10 and FTdx1200 
have identical CAT commands and replies.  THEY DO NOT. Select the wrong 
transceiver and  you will waste your time, the support team time, and 
the developer team time.

73, David, W1HKJ