[Ham-Mac] FLrig Mic Gain setting w/ FT-DX10 #flrig

[w1hkj]

new alpha test version posted at http://www.w1hkj.com/alpha/flrig/

	flrig-1.4.5.30.tar.gz 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.5.30.tar.gz> 	2022-07-14 
21:36 	1.0M 	
	flrig-1.4.5.30_BS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.5.30_BS.dmg> 	2022-07-14 
21:36 	3.9M 	
	flrig-1.4.5.30_HS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.5.30_HS.dmg> 	2022-07-14 
21:36 	2.3M 	
	flrig-1.4.5.30_LI.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.5.30_LI.dmg> 	2022-07-14 
21:36 	2.0M 	
	flrig-1.4.5.30_setup.exe 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.5.30_setup.exe> 	2022-07-14 
21:36 	1.4M 	
	readme.dmg.txt <http://www.w1hkj.com/alpha/flrig/readme.dmg.txt> 
2022-07-14 21:36 	542 	
	readme.txt <http://www.w1hkj.com/alpha/flrig/readme.txt> 	2022-07-14 
21:36 	349K 	


commit f8b5296e9aead6a72a54c9fdc17b187e92a8560e
Author: dave-w1hkj <w1hkj at bellsouth.net>
Date:   Thu Jul 14 17:35:37 2022 -0500

     Yaesu microphone gain

       * change scaling for these transceivers:
         . FTDX1200, FTDX3000, FTDX101D, and FTDX10

See the readme.txt file for a complete list of changes.

73, David, W1HKJ

On 7/10/22 11:56, Chip Coker KD4C wrote:
> I'm using FLrig to control my Yaesu FT-DX10, and I just noticed (after 
> a report of distored audio) that a "Mic" setting of 13 on the FLrig 
> slider will set the radio Mic Gain to 35.  Max mic gain on the radio 
> is 100 and that will set the FLrig slider to 39. Setting the slider to 
> numbers higher than 39 has no effect on the radio.  Is there a scale 
> factor that I should have set somewhere in the settings for FLrig that 
> I missed?
>
> Future DXpeditions will thank you.
>
> 73 - Chip KD4C