[Ham-Mac] flrig-1.4.4.15 posted

[w1hkj]

at http://www.w1hkj.com/alpha/flrig/

	flrig-1.4.4.15.tar.gz 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.4.15.tar.gz> 	2022-01-23 
13:11 	962K 	
	flrig-1.4.4.15_BS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.4.15_BS.dmg> 	2022-01-23 
13:11 	3.3M 	
	flrig-1.4.4.15_HS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.4.15_HS.dmg> 	2022-01-23 
13:11 	2.0M 	
	flrig-1.4.4.15_LI.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.4.15_LI.dmg> 	2022-01-23 
13:11 	1.8M 	
	flrig-1.4.4.15_setup..> 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.4.15_setup.exe> 	2022-01-23 
13:11 	1.3M 	
	flrig-shell <http://www.w1hkj.com/alpha/flrig/flrig-shell> 	2022-01-23 
13:11 	9.3K 	
	readme.dmg.txt <http://www.w1hkj.com/alpha/flrig/readme.dmg.txt> 
2022-01-23 13:11 	555 	
	readme.txt <http://www.w1hkj.com/alpha/flrig/readme.txt> 	2022-01-23 
13:11 	1.4K 	


Date:   Sun Jan 23 09:07:00 2022 -0600

     alpha 1.4.4.15

     10 W Power scale
       * Add 10 W power scale
       * Correct power scale auto switching logic

     G90 update
       * Update iaw V1.0, Radioddity CAT/Digimode manual
         - added CW spot
         - added Auto Tune On/Off

     FT1000MP-MKV
       * added FT1000MP_A transceiver class
         . something fishy in Yaesu land.  flrig now supports separate
           classes for FT1000, FT1000MP and FT1000MP_A to satisfy
           reported differences in vfo set/get on seemingly identical
           transceiver models
       NOTE: IF YOU TEST PLEASE REPORT RESULTS AND WITH WHICH SELECTION

     FT990/A
       * add get/set trace statements to FT990 and FT990A class methods

     VFO in use
       * change in use tracking to be class specific

     xmlrpc mod vol
       * correct logic

     FT-891 split
       * add split method to FT-891 transceiver class

     tab visible
       * Correct save/restore logic for tabs dialog

     FTdx10
       * correct commands for vfo A/B select and split operation

     TX500
       * Implement CAT get/set PTT

     Start up failure
       * Fix NULL bandwidth pointers for PowerSDR, Flex1500 etc.

     TS2000 split
       * change get_split to return 0,1,2,3 depending on vfo T/R usage.

     FTdx101D split
       * restore missing split button

     TX vfo
       * add read VFO when PTT enabled

   Version 1.4.4

73, David, W1HKJ