[Ham-Mac] flrig-1.4.7.03 posted

[w1hkj]

at http://www.w1hkj.com/alpha/flrig/

	QCX+FLRIG.png <http://www.w1hkj.com/alpha/flrig/QCX+FLRIG.png> 
2022-08-31 16:19 	162K 	
	flrig-1.4.7.03.tar.gz 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.03.tar.gz> 	2022-08-31 
16:19 	1.0M 	
	flrig-1.4.7.03_BS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.03_BS.dmg> 	2022-08-31 
16:19 	3.9M 	
	flrig-1.4.7.03_HS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.03_HS.dmg> 	2022-08-31 
16:19 	2.3M 	
	flrig-1.4.7.03_LI.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.03_LI.dmg> 	2022-08-31 
16:19 	2.1M 	
	flrig-1.4.7.03_setup.exe 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.7.03_setup.exe> 	2022-08-31 
16:19 	1.4M 	
	readme.dmg.txt <http://www.w1hkj.com/alpha/flrig/readme.dmg.txt> 
2022-08-31 16:19 	542 	
	readme.txt <http://www.w1hkj.com/alpha/flrig/readme.txt> 	2022-08-31 
16:19 	1.0K 	


See the readme.txt for changes post 1.4.7

Dave, VK2DSU, please test 7.03 noting any UI and/or control changes.

73, David, W1HKJ

On 8/24/22 01:36, David, VK2DSU wrote:
> I have been using flrig and FLDIGI for some time with an IC-7600 and have just upgraded to an IC-7851 but Flrig is not operating correctly.
>
> With the IC-7851 Fldigi reports the sub VFO frequency value as both VFOA and VFOB.
>
> Adjusting any controls will adjust on the VFOA or B correctly and display the value correctly.
> So if VFO(A) is selected and you adjust a slider it will change that value for the Main VFO on the rig.
> If VFO(B) is selected and you adjust a slider it will change that value for the sub VFO
>
> Changing the mode and filter size always only changes the main VFO
> Changing the frequency regardless of which VFO is selected only changes the frequency on the sub VFO.
>
> I am using the latest versions of Flrig and Fldigi from W1hk web site on a Mac M1 mini running OS Monterey.
>
> Any ideas , happy to help debug it to get it to work..
>
> Dave
> (VK2DSU)