[Ham-Mac] flrig-1.4.2.22 posted at

[w1hkj]

http://www.w1hkj.com/alpha/flrig/

	flrig-1.4.2.22.tar.gz 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.22.tar.gz> 	2021-10-29 
22:37 	916K 	
	flrig-1.4.2.22_BS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.22_BS.dmg> 	2021-10-29 
22:37 	3.4M 	
	flrig-1.4.2.22_HS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.22_HS.dmg> 	2021-10-29 
22:37 	2.0M 	
	flrig-1.4.2.22_LI.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.22_LI.dmg> 	2021-10-29 
22:37 	1.8M 	
	flrig-1.4.2.22_setup..> 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.22_setup.exe> 	2021-10-29 
22:37 	1.3M 	
	readme.dmg.txt <http://www.w1hkj.com/alpha/flrig/readme.dmg.txt> 
2021-10-29 22:37 	537 	
	readme.txt <http://www.w1hkj.com/alpha/flrig/readme.txt> 	2021-10-29 
22:37 	4.7K 	


Date:   Fri Oct 29 06:01:25 2021 -0500
     TX500
       * Add Lab599 TX500 transceiver

Date:   Thu Oct 28 20:40:14 2021 -0500
     cw generator
       * update to timing intervals for CW generator

Date:   Tue Oct 26 10:42:01 2021 -0500
     ftdx101d
       * fix table lookups for bandwidth

Date:   Thu Oct 28 06:57:17 2021 -0500
     FTdx10
       * add as independent transceiver backend
         . shares many identical CAT commands to FTdx101D
...

Note: TX500 transceiver support is for all of the Lab599 implemented CAT 
commands.  You can set DIG mode from flrig, but the transceiver will 
annunciate that mode as USB and immediately change the flrig selection 
to USB.  The TX500 however remains in DIG mode.

73, David, W1HKJ