[Ham-Mac] flrig 1.4.3

[w1hkj]

Posted to http://www.w1hkj.com/files/flrig/

	flrig-1.4.3.tar.gz 
<http://www.w1hkj.com/files/flrig/flrig-1.4.3.tar.gz> 	2021-11-14 11:56 
922K 	
	flrig-1.4.3_BS.dmg 
<http://www.w1hkj.com/files/flrig/flrig-1.4.3_BS.dmg> 	2021-11-14 11:56 
3.4M 	
	flrig-1.4.3_HS.dmg 
<http://www.w1hkj.com/files/flrig/flrig-1.4.3_HS.dmg> 	2021-11-14 11:56 
2.0M 	
	flrig-1.4.3_LI.dmg 
<http://www.w1hkj.com/files/flrig/flrig-1.4.3_LI.dmg> 	2021-11-14 11:56 
1.8M 	
	flrig-1.4.3_setup.exe 
<http://www.w1hkj.com/files/flrig/flrig-1.4.3_setup.exe> 	2021-11-14 
11:56 	1.3M 	
	flrig-help.pdf <http://www.w1hkj.com/files/flrig/flrig-help.pdf> 
2021-11-14 11:56 	2.5M 	
	flrig-help.zip <http://www.w1hkj.com/files/flrig/flrig-help.zip> 
2021-11-14 11:56 	3.3M 	
	flrig.txt <http://www.w1hkj.com/files/flrig/flrig.txt> 	2021-11-14 
11:56 	3.1K 	
	readme.dmg.txt <http://www.w1hkj.com/files/flrig/readme.dmg.txt> 
2021-11-14 11:56 	537 	
	readme.txt <http://www.w1hkj.com/files/flrig/readme.txt> 	2021-11-14 
11:56 	3.1K 	


and to Source Forge <https://sourceforge.net/projects/fldigi/files/flrig/>.

Source Forge flrig master branch repository updated to 1.4.3

73, David, W1HKJ

   Version 1.4.3 - Maintenance release

     cwio accu_sleep
       * replace milliSleep with new accu_sleep function
       * change activated state of configuration items based on
         port selection
       * change loop timing to use global accu_sleep

     A2B freq only
       * add shift-click to A->B button to transfer only
         frequency from vfoA to vfoB
       * add control-click to A->B button to transfer only
         frequency for vfoB to vfoA

     vfo adjust
       * change increment to fractional values

     start/exit set clock
       * add user configurable commands on program
         . start - immediately after normal start up
         . exit - immediately after normal exit
       * add time sychronization if supported by xcvr
         . xcvr clock synchronized to PC clock on next minute
           rollover, to nearest 50 msec.
         . implemented for these transceiver:
           - ic7100, ic7300, ic7600, ic7610,
             ic7700, ic7800, ic7851
           - FT991, FT991A, FTdx10, FTdx101D, FTdx101MP
             FT1200:time only
           - TS990
         . corrected deactivated controls on some supported xcvrs

     TX500
       * Add Lab599 TX500 transceiver

     cw generator
       * update to timing intervals for CW generator

     ftdx101d
       * fix table lookups for bandwidth

     FTdx10
       * add as independent transceiver backend
         . shares many identical CAT commands to FTdx101D

     FT1000MP
       * correct read vfo A/B conversion logic

     cw invert
       * allow user to specify DTR/RTS either normal (+) or
         inverted(-) signaling.

     Power control
       * change to floating point control to allow for
         fractional changes in power level, i.e. 0.1 W / step

     elad
       * Add ELAD FDM-DUO qrp transceiver

     g90 cw/power/swr
       * set CW/CWR tuning sense
       * update power/swr methods

     K3 power level
       * add OM; read for power level min/max/step initialization

     Disable Polling
       * USE to test various comms issues between flrig and transceiver
         . allow user to disable polling
         . allow user to disable xmlrpc server

     Transmit meters
       * FT991A reported as not showing power out during transmit cycle

     cmedia/serial port
       * allow both serial port and cmedia devices to be initialized
         during startup

     K3/KX3/KXPA metering
       * correct smeter conversion
       * read KX3 power out when KXPA is in standby mode
       * Add code to read SWR from KXPA if active
         . note: the KXPA100 programmers guide
       * Add get trace for KXPA swr reads

     IC7851/9610/9700
       * Change get/set vfoA/B to use x25, x26 command strings
       * correct set/get bandwidth by mode/data/filter

     KX3 ptt/if-shift
       * add get_PTT
       * add reset IF shift control based on current mode
       * add has_ptt_control as test for get_PTT call
       * poll for change in KXPA presence with poll of
         power level setting.  Perform test during both Rx and Tx status

     kx3_options
       * use GET OPTIONS to discover KXPA100 presence

     kx3 extras
       * add programmed support for KXPA