[Ham-Mac] flrig-1.4.4.03 posted at

[w1hkj]

http://www.w1hkj.com/alpha/flrig/

	flrig-1.4.4.03.tar.gz 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.4.03.tar.gz> 	2021-12-28 
07:41 	956K 	
	flrig-1.4.4.03_BS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.4.03_BS.dmg> 	2021-12-28 
07:41 	3.4M 	
	flrig-1.4.4.03_HS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.4.03_HS.dmg> 	2021-12-28 
07:41 	2.0M 	
	flrig-1.4.4.03_LI.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.4.03_LI.dmg> 	2021-12-28 
07:41 	1.8M 	
	flrig-1.4.4.03_setup..> 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.4.03_setup.exe> 	2021-12-28 
07:41 	1.3M 	
	flrig-shell <http://www.w1hkj.com/alpha/flrig/flrig-shell> 	2021-12-28 
07:41 	9.3K 	
	readme.dmg.txt <http://www.w1hkj.com/alpha/flrig/readme.dmg.txt> 
2021-12-28 07:41 	555 	
	readme.txt <http://www.w1hkj.com/alpha/flrig/readme.txt> 	2021-12-28 
07:41 	409 	


Date:   Tue Dec 28 06:30:00 2021 -0600

   alpha 1.4.4.03

     TX500
       * Implement CAT get/set PTT  (1)

     Start up failure
       * Fix NULL bandwidth pointers for PowerSDR, Flex1500 etc.

     TS2000 split
       * change get_split to return 0,1,2,3 depending on
         vfo T/R usage.

     FTdx101D split
       * restore missing split button

     TX vfo
       * add read VFO when PTT enabled

   Version 1.4.4

(1) please note that the Smeter will always read S2.  My TX500, firmware 
version 1.12.00, always responds to the SM; query with SM00002;  It's 
response was identical prior to the firmware update.

73, David, W1HKJ