[Ham-Mac] flrig-1.4.3.24 posted at

[w1hkj]

http://www.w1hkj.com/alpha/flrig/

	flrig-1.4.3.24.tar.gz 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.24.tar.gz> 	2021-12-22 
21:09 	954K 	
	flrig-1.4.3.24_BS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.24_BS.dmg> 	2021-12-22 
21:09 	3.4M 	
	flrig-1.4.3.24_HS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.24_HS.dmg> 	2021-12-22 
21:09 	2.0M 	
	flrig-1.4.3.24_LI.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.24_LI.dmg> 	2021-12-22 
21:09 	1.8M 	
	flrig-1.4.3.24_setup..> 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.24_setup.exe> 	2021-12-22 
21:09 	1.3M 	
	flrig-shell <http://www.w1hkj.com/alpha/flrig/flrig-shell> 	2021-12-22 
21:09 	9.3K 	
	readme.dmg.txt <http://www.w1hkj.com/alpha/flrig/readme.dmg.txt> 
2021-12-22 21:09 	555 	
	readme.txt <http://www.w1hkj.com/alpha/flrig/readme.txt> 	2021-12-22 
21:09 	721 	


Added menu item to enable/disable viewing the voltmeter on main dialog.  
The voltmeter is always visible in the meters dialog.



2021-12-22  dave-w1hkj <w1hkj at bellsouth.net>

     4d54f12d: Alpha
     c136601f: voltmeter menu item
     fb3a2bef: Volt meter
     4fbd313b: FT 817/100D
     7383a942: XmlRpc modify exchange
     60f86c60: Initial xcvr selection
     46dd5836: ic-7610
     4ceec858: tmate2
     1b5081f4: UI debug
     8e7f3e95: wide ui
     209c96ea: IC756 pro
     fe691c90: embedded/dialog tabs
     95a69fa3: Signal Bar
     db82396f: Documentation

2021-11-29  Brian Waterworth <brian.waterworth at gmail.com>

     54ea1c07: FT450D power out

2021-11-28  dave-w1hkj <w1hkj at bellsouth.net>

     c4c16004: Power Meter Autoscale
     536df7b1: fl_alert messages
     d35abcbc: FreqControl
     24eff108: fsk
     07806773: cwio-timing
     0b77439e: code cleanup
     4a1e6432: IC7800 time set

     2e02298b: Version 1.4.3