[Ham-Mac] flrig 1.4.3.20 posted at

[w1hkj]

http://www.w1hkj.com/alpha/flrig/

	flrig-1.4.3.20.tar.gz 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.20.tar.gz> 	2021-12-19 
07:49 	954K 	
	flrig-1.4.3.20_BS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.20_BS.dmg> 	2021-12-19 
07:49 	3.4M 	
	flrig-1.4.3.20_HS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.20_HS.dmg> 	2021-12-19 
07:49 	2.0M 	
	flrig-1.4.3.20_LI.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.20_LI.dmg> 	2021-12-19 
07:49 	1.8M 	
	flrig-1.4.3.20_setup..> 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.20_setup.exe> 	2021-12-19 
07:49 	1.3M 	
	flrig-shell <http://www.w1hkj.com/alpha/flrig/flrig-shell> 	2021-12-19 
07:49 	9.3K 	
	readme.dmg.txt <http://www.w1hkj.com/alpha/flrig/readme.dmg.txt> 
2021-12-19 07:49 	555 	
	readme.txt <http://www.w1hkj.com/alpha/flrig/readme.txt> 	2021-12-19 
07:49 	483 	


Alpha 1.4.3.20

     FT 817/100D eval
       * evaluate reported issues reading power out
         . during transmit flrig will append hex data to the files
           K0OG-817.txt, K0OG-100D.txt respectively.  Each data line
           consists of
             cmd: xx xx xx xx xx, reply: xx xx xx xx ... xx
         . data acquired for Pout only.  Be sure to enable power out 
polling.

     Initial xcvr selection
       * Activate CI-V selection controls based on selected transceiver

Please send hex data files to my bellsouth.net email address.

73, David