[Ham-Mac] flrig 1.3.52.11 posted at

[w1hkj]

http://www.w1hkj.com/alpha/flrig/

  * flrig-1.3.52.11.tar.gz
    <http://www.w1hkj.com/alpha/flrig/flrig-1.3.52.11.tar.gz>
  * flrig-1.3.52.11_i386.dmg
    <http://www.w1hkj.com/alpha/flrig/flrig-1.3.52.11_i386.dmg>
  * flrig-1.3.52.11_setup.exe
    <http://www.w1hkj.com/alpha/flrig/flrig-1.3.52.11_setup.exe>
  * flrig-1.3.52.11_x86_64.dmg
    <http://www.w1hkj.com/alpha/flrig/flrig-1.3.52.11_x86_64.dmg>

Sat Nov 21 12:00:00 2020 -0500 Version 1.3.52.11

   OpenBSD
     * Add serial port discovery for OpenBSD

   Xiegu G90 etal
     * Correctly parse Xiegu G90 power output in tenths of watts
     * Add XML-RPC API: rig.get_pwrmeter_scale. Divide rig.get_pwrmeter by
       this value to get the actual value in watts.
     * Add XML-RPC API: rig.get_swrmeter (currently broken with G90 since it
       seemingly always outputs 0)

   FT757GX2
     * adde Yaesu FT-757GX2 transceiver

   Cmd Buttons
     * fix issue with commands 17-24

   FTdx101D
     * Correct read ALC

   IC705
     * change power set/get to % of full power

   commands
     * fix read/write of commands to status file

   FT450D
     * add AGC button
     * relabel IPO button

   Extras dialog
     * change tab labels for better fit on Pi & macOS

   FT-991/A
     * FT991A
       - Correct FT991A mic gain, values are 0 .. 100.
       - FT-991A split
         . The FT-991/A does not support the FR CAT command
         . change to use RI (Radio Information) CAT command
       - Add 50ms delay between setting PTT and reading
         . corrects timing problems with WSJTX.
     * FT991, clean up class code structures

   Remove superfluous ceil call in get_rf_gain() as the cast to int 
truncates it anyway.

   FT450D / TS-480SAT
     * Change for loops to while loops.
     * Simplify logic in some places.
     * Fix RF slider values on the FT-450D which were inverted

   CPU optimization
     * added new --enable-optimizations options to ./configure
       - RaspberryPi 1,2,3,4 [rpi1, rpi2, rpi3, rpi4]
       - BeagleBone Black [bbb]
       - Cyclone5 [cyclone5]
       - Optimize for sse4 [sse4]
       - Use AVX extensions [avx, avx2]
       - i486, i686 [i486, i686]
       - x86-64 [x86-64]
       - ARM CPU-native [nativeARM]

   Font Browser
     * fix segmentation fault

73, David, W1HKJ