[Ham-Mac] fldigi 4.1.11 posted

[w1hkj]

At http://www.w1hkj.com/files/fldigi/

  * fldigi-4.1.11.tar.gz
    <http://www.w1hkj.com/files/fldigi/fldigi-4.1.11.tar.gz>
  * fldigi-4.1.11_i386.dmg
    <http://www.w1hkj.com/files/fldigi/fldigi-4.1.11_i386.dmg>
  * fldigi-4.1.11_setup.exe
    <http://www.w1hkj.com/files/fldigi/fldigi-4.1.11_setup.exe>
  * fldigi-4.1.11_x86_64.dmg
    <http://www.w1hkj.com/files/fldigi/fldigi-4.1.11_x86_64.dmg>

and at Source Forge.

Please remove 4.1.10 from your system and install 4.1.11.  Sorry for the 
inconvenience.  This was definitely a programmer error :'(.

73, David, W1HKJ

------------------------------------------------------------------------

Wed Apr 1 2020 - Version 4.1.11 *** Bug fix release *** cwio_morse * 
segmentation fault fix - change cwio_morse to *cwio_morse AWOL CW id 
button * Fixed "hidden" state of CW ID button MacOS * update build.m4 
for Xcode 11 Macros * Restore execution code for <TUNE * Retain delayed 
execution code for <!TUNE * Create new macro <@TUNE * All three versions 
allow tune interval to be spec'd in fractional seconds, i.e. 2.5, 5.1 
10.0 15 * <TUNE:nn.nn> used alone returns to receive * <TUNE:nn.nn> 
followed by text remains in transmit to complete the transmission. * 
Examples: . <TUNE:10.0> . <TUNE:5> <TX>tune test <!TUNE:1.5> de w1hkj k 
<RX> <@TUNE:2.5> * Remove text size restriction on CPS test report. 
RigCat config * restore missing control labels CW 5 wpm * 5 wpm 
farnsworth speed demands larger OUTBUFSIZE - increase output buffer to 
65536 audio alert * fix seg fault - test for existence of audio_alert 
instance analysis mode * changes to data file output - submitted by John 
Gibbons, N8OBJ flrig auto off * add ability to shutdown flrig/xcvr 
during fldigi shutdown maclogger * correct interpretation of UDP 
frequency string * update transceiver frequency based on UDP frequency 
mkappbundle * modify 'version' to include patch level nanoIO * Correct 
TTY interface code start/stop transitions * add code to soften the 
start/stop transitions for all modems CW DTR-RTS * generate CW on 
selected DTR/RTS signal line * CW DTR/RTS signals generated concurrent 
with AF counterparts and within a separate thread. Olivia 2 tones * 
correct trailing edge cutoff of postamble tones Xmlrpc Xcvr * enable QSY 
when Xmlrpc client xcvr is connected mp3 * simplify mp3 conversions - 
test for file access using fopen - use linear sample rate converter 
contestia cr * correct suppression of <CR> display serial port * insure 
that DTR and RTS are always disabled when closing port Check Version * 
correct version check logic