[Ham-Mac] flrig 1.3.45.09 posted

[w1hkj]

  * flrig-1.3.45.09.tar.gz
    <http://www.w1hkj.com/alpha/flrig/flrig-1.3.45.09.tar.gz>
  * flrig-1.3.45.09_setup.exe
    <http://www.w1hkj.com/alpha/flrig/flrig-1.3.45.09_setup.exe>
  * flrig-1.3.45.09_x86_64.dmg
    <http://www.w1hkj.com/alpha/flrig/flrig-1.3.45.09_x86_64.dmg>
  * readme.txt <http://www.w1hkj.com/alpha/flrig/readme.txt>

The flrig tune button has been split into "auto tune on/off" and "manual 
tune" buttons:

	
OFF
	ON


The manual tune button will always initiate a transceiver tune 
operation.  Depending on the transceiver operation that may or may not 
leave the transceiver in the "auto tune" condition.  My IC-7200 leaves 
my external LDG in the auto-tune mode after a manual tune, or when 
toggling the tune on/off button to the on state.  Cliff, AE5ZA, who 
tests the IC-7300 on OS X, reports that same response for both the 
internal and an external tuner.

alpha 1.3.45.09

   auto_on_off
     * change auto on to be first event in transceiver get/set sequence

   FT-450
     * Comment out 3 second "wait for rig startup "
     * Move auto on before initialize() and check()
       - insures check can return true during initialisation.

   IC F8101
     * Add backend for F8101 commercial transceiver

   Split Tune button
     * split tune button into on/off and manual tune
     * add on/off and manual tune methods to:
       - FT1000, FT2000, FT450, FT450D, FT5000, FT891,
         FT950, FTdx1200, FTdx3000, FTdx9000,
       - IC703, IC7100, IC7200, IC7300, IC746, IC756PRO2, IC756PRO3,
       - IC7600, IC7610, IC9100,
       - K2
       - Kenwood xcvrs with tune capability

   support
     * update to compression, mic gain, and power control
       initialization.  add missing conditional statements

   TS870S
     * Change class to use base class KENWOOD vice rigbase

   Read VFO A
     * Fix error in support,

   MacOS high-DPI
     * enable high-DPI on macOS and Microphone on macOS 10.14
       - enable highDPI on retina display
       - request microphone usage on macOS 10.14 (mojave)

   timeops
     * fix for OS-X Xcode < 7.2

   Fix FT-450 split
     * FT-450 doesn't have separate Tx / Rx split commands.
       - changed FR; to FT;


73, David, W1HKJ