[Ham-Mac] flrig 1.3.29 posted

[w1hkj]

At http://www.w1hkj.com

  * flrig-1.3.29.tar.gz
    <http://www.w1hkj.com/files/flrig/flrig-1.3.29.tar.gz>
  * flrig-1.3.29_i386.dmg
    <http://www.w1hkj.com/files/flrig/flrig-1.3.29_i386.dmg>
  * flrig-1.3.29_ppc.dmg
    <http://www.w1hkj.com/files/flrig/flrig-1.3.29_ppc.dmg>
  * flrig-1.3.29_setup.exe
    <http://www.w1hkj.com/files/flrig/flrig-1.3.29_setup.exe>
  * flrig-help.pdf <http://www.w1hkj.com/files/flrig/flrig-help.pdf>
  * flrig-help.zip <http://www.w1hkj.com/files/flrig/flrig-help.zip>
  * readme.txt <http://www.w1hkj.com/files/flrig/readme.txt>

and Source Forge

  * https://sourceforge.net/projects/fldigi/files/flrig/

Version 1.3.29

   * Maintenance release

   TS990 update

     * Enable MON on/off for TX monitoring
     * Set / Read SWR & ALC
     * Replace all atoi(...) code with fm_decimal(p, n)

   FT817

     * added code to read vfo B state
     * added 5 watt power scale
     * added undocumented read vfo A/B state
     0x00 0x55 0x00 0x00 0xBB
     * Implement undocumented CAT command BD to read
     PWR, SWR and ALC
     * Prevent flrig from making changes to xcvr vfo
     mode etc. when memory channel usage detected
     - display MEMORY on flrig main display when
       so detected
     * disabled POWER control on wide and touch UI

   Xcvr Init

     * cleaned up init code to provide improved code readability
     * added test for two vfos to VFO initialization

   k3 kx3

     * code change needed to read K3/KX3 meters

   AGC button

     * set button illumination to user color selection

   initial bandwidth

     * retain xcvr bandwidth when changing modes via xmlrpc server
     command

   BCD/Decimal conversions

     * change parameter passing to string vice sz pointer.
     - 64 bit compiles were passing null strings when contents
       of original substr returned values were similar to "00 40" !

   Missing tooltips

     * Added tooltips for S-meter, CW-wpm

   Polling

     * Add set all for meters & operating controls

   TS480SAT update

     * Update to NR, AN, and Squelch controls
     * Change default baud rate to 57600

   FT817 metering

     * Enable S-meter and Power-out metering

   Exchange-Equalize AB

     * Implement Exchange CAT command for Icom xcvrs
     - 718, 706MKIIG
     - 746, 746PRO, 756, 756PRO2, 756PRO3
     - 7000, 7100, 7200, 7300, 7410, 7600, 7800
     - 910, 9100

   IC7300 update

     * all updates combined effort of KB1OIQ and W1HKJ
     * change mode set/get methods
     * correct various command strings
     * added AGC, OFF, FAST, MED, SLO
     * add IF shift function using upper/lower passband tuning commands.
     - IF shift slider range changes to +/- BW/2 as bandwidth
       is selected.
     - IF shift slider always increments by 50 Hz
     * added tooltips to VOX and Compression controls

   PCR1000 update

     * correction to IF Shift control method
     * corrected various text strings

   IC7200 mods

     * modify set_split method
     * add get_split, can_split methods
     * add IF shift function using upper/lower passband
     tuning commands.
     - IF shift slider range changes to +/- BW/2 as bandwidth
       is selected.
     - IF shift slider always increments by 50 Hz
     * correct logic for queA / queB processing

73, David
W1HKJ