[Ham-Mac] fldigi 3.23.13-a10 posted for testing
Richard Kriss
aa5vu at att.net
Sat Jul 23 15:07:50 EDT 2016
Seems to work fine here under OS X 10.11.6 even though I do not use most of the new enhancements
Dick AA5VU
ps: Just realized I was using Hamlib and it shows TS-590S rather than TS-590SG
I just changed back to my normal RigCAT and it show TS-590SG
> On Jul 23, 2016, at 1:42 PM, w1hkj <w1hkj at bellsouth.net> wrote:
>
> https://sourceforge.net/projects/fldigi/files/alpha_tests/
>
> mirrors at
>
> http://www.w1hkj.com/alpha/fldigi/, and
>
> http://www.w1hkj.com/files/alpha_tests/
>
> Link to on line help for version 3.23.13-a10 <http://www.w1hkj.com/alpha/fldigi/html/>
>
> 73, David, W1HKJ
> for the developers
>
> Changes in 3.23.13-a10
>
> Author: Robert Stiles <kk5vd at yahoo.com>
>
> m4 fixes
> * c++11 m4 check
>
> PSM Documentation Update
> * Added documentation regarding configuration and use of
> Power Signal Monitor, PSM.
>
> KPSQL PSM
> * Change KPSQL to PSM to avoid function misinterpretation.
> * Move PSM (KPSQL) out of KISS IO and integrate to operate
> on all TX ops (ARQ/KISS/XMLRPC/Keyboard).
> * New source code files psm/psm.[h/cxx]
> * Add IO configuration panel to support PSM.
> * Update src/makefile.am.
> * Change: Set flush buffer to 0 minutes disables action.
> * KISS IO not transmitting, FIXED
> * Add "DISC:" hardware command.
> * Add Socket TCP/IP-KISS connection watchdog.
> * Add missing activate/deactivate IO config widgets
> * Reorganized kiss_loop() and kiss_rx_loop() functions.
> * Add: THOR22/THOR16 modems for KISS OPS
> * Update: kiss_close() for a clean ordered socket termination.
> * Add missing headers to resolve forward declaration issues (c++11)
> * Add: C++11 compiler test in configure.ac.
> * Update bind.m4 and hash.m4.
> * Add c++11.m4 for c++11 detections.
> * Ensure Waterfall mode active when PSM is in operation.
> * Add: Check FFT->Power Spectra memory boundry before assignement.
> * Add: Check for NULL pointer for queue prior to executions.
> * Cancel pending transmission on user T/R (second) button press request.
> * make visibility of PSM button user configurable
>
> Author: David Freese <iam_w1hkj at w1hkj.com>
>
> G4 build warnings
> * Correct G4 build warnings
>
> winsock2 error flag
> * Fix to defeat recent error report for mxe build
> - thanks to KK5VD for the fix
>
> Macro tag PUSH/POP
> * Added macro tags <PUSH:...> <POP>
> - <PUSH:m|f>
> . m - mode
> . f - waterfall audio frequency
> - <PUSH:mf> same as <PUSH>
> - <PUSH:m> push digital mode
> - <PUSH:f> push waterfall frequency
> - PUSH is a first-in last-out stack operation
> - POP only restores the relevant operating values
> * Added macro tags to insert digital mode / operating freq
> data into Tx text at time of execution (not time of parse)
> - <DIGI> <!DIGI> - insert ADIF mode specifier
> - <!FREQ> - insert rf op' frequency (carrier +/- audio)
>
> xmlrpc error warnings
> * fix remaining compiler warnings in misc/xmlrpc.cxx
>
> Port Audio Index
> * Change behavior of presetting PA selector
>
> Documentation
> * update to on line help
>
> Squeeze Play
> * Changes to allow fldigi use on 800x480 touch screens
> commonly used with Pi3 computers
> - min main_height 430
> - min main width 780
> - removed dockable 48 macro scheme
> - added internal 48 macro / 4 bar scheme
> - reduced feld-hell Rx minimum raster height to a
> single line of text.
> * removed dockgroup support code from source tree
>
> Title bar
> * Add version number to title bar.
> - insure that pulseaudio recognizes initial application
> name for matching audio device to application, i.e.
> default: fldigi
> title string if -title NAME is passed on fldigi command line.
>
> FSQ allcall relay
> * Change rx stream parser to display valid allcall relays
> in the received text panel.
>
> Author: Kamal Mostafa <kamal at whence.com>
>
> FTextTX: fix menu_cb default case behavior
> status: fix override_data_io_enabled behavior
> logbook: do not write empty string to ADIF
> wefax fix APT start frequency power calculation
> fix warnings: misleading-indentation (no functional changes)
> fix warning: unused variable 'call_file'
> fix warning: C11 requires spaces around string macro
> fix warning: format '%d' vs size_t
> XmlRpc tm_mday fix
>
> ______________________________________________________________
> Ham-Mac mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ham-mac
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Ham-Mac at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Ham-Mac
mailing list