[Ham-Mac] TS-590S and fldigi Working FB with OS X 10.11.1 El Capitan

[Richard Kriss]

Bill, KA4GAV.

Lets start with the warning message.  To see it you have to go to your Utilities folder, launch the Console,  drill down the left sidebar and mouse on system.log. Run fldigi and transmit a few time and you will then seen the WARNING

You did not provide enough information for me to help you with the lack of rig control.  I will send you off line a copy of my RigCAT configuration settings.

Send me a copy of yours and I will try to help you get rig control working. The TS-590 uses the Silicon Lab USB to UART driver and you only need a single USB cable for the interface. I think the ftdi driver may be needed for the FT-1000. This is the driver you need for the TS-590S

http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx

73 Dick AA5VU


> On Oct 22, 2015, at 11:22 PM, Bill Turini <bill.turini at me.com <mailto:bill.turini at me.com>> wrote:
> 
> Fldigi now works after the OS X update.  I get no warning messages, but I also have no rig control.  It doesn’t see my TS590s, but it does see my FT-1000 Mk V.  Do I need to reinstall my ftdi drivers?
> 
> Thanks,
> 
> Bill
> 
> Bill Turini
> KA4GAV
> bill.turini at me.com <mailto:bill.turini at me.com>
> 
> 
> 
> 
>> On Oct 22, 2015, at 6:47 PM, Richard Kriss <aa5vu at att.net> wrote:
>> 
>> 
>> Ham Happiness - About two hours ago I made PSK-31 QSO using OS X 10.11.1 (build ID 15B42) that was recently released using fldigi-3.23.04 to the Kenwood TS-590S with a direct USB interface. Fldigi did not hang or freeze like it was doing with all previous builds of El Capitan.
>> 
>> I still get the WARNING message
>> 
>> Oct 22 14:47:13 Dicks-iMac fldigi[1291]: 14:47:13.936 WARNING:  140: This application, or a library it uses, is using the deprecated Carbon Component Manager for hosting Audio Units. Support for this will be removed in a future release. Also, this makes the host incompatible with version 3 audio units. Please transition to the API's in AudioComponent.h.
>> 
>> but it now works rather than hanging. The only thing I did was turn OFF the computer and turn it back on - go figure.
>> 
>> I filed a formal Bug Report on the fldigi issue on one of the early builds and something tells me Apple Engineering may have done some tweaking in the 15B42 build of OS X 10.11.1 that will give W1HKW some time to find a replacement for the deprecated Port Audio 19 used in fldigi. 
>> 
>> Just worked a CW and RTTY station. It is nice to have fldigi working again. 
>> 
>> 73 Dick AA5VU
>> ______________________________________________________________
>> Ham-Mac mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/ham-mac
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Ham-Mac at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Ham-Mac mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ham-mac
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Ham-Mac at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html