[Ham-Mac] [linuxham] fldigi 3.22.01 release

[Dave Wright]

Downloaded and running fine here, except for the same problem with the channels browser not staying visible after a restart.  In fact, not only does it not stay visible, but it resets its size each time back to the default as well.  

Now, the Signal Browser in the external window works just fine, staying in place and staying open from session to session, so it is something specific to the channel browser inside Fldigi’s window that is the issue. 

This in on OS X Yosemite 10.10

73

Dave Wright
K3DCW

www.machamradio.com

“Real radio bounces off the sky"



> On Oct 21, 2014, at 09:15, w1hkj w1hkj at bellsouth.net [linuxham] <linuxham at yahoogroups.com> wrote:
> 
> fldigi 3.22.01 has been release and posted to http://www.w1hkj.com
> 
> with the following changes from version 3.22.00
> 
> Version 3.22.01 * Maintenance release
> 
> RX single click
> * restored Name / QTH clickable (1)
> 
> Macro Buttons
> * Increase width of alternate macro button(s)
> * Add 2 row scheme, one above, one below text panel
> 
> Thumb drive
> * update documentation on thumb drive installation
> 
> Power Squelch
> * Correct initial state of power squelch
> 
> Documentation update
> * Added missing documentation on use of Smeter / Power-meter
> display on main dialog.
> * Added new xmlrpc TxID commands
> 
> TxID control via xmlrpc
> * Added xmlrpc commands
> - Main.get_txid
> - Main.set_txid
> - Main.toggle_txid
> 
> Analysis modem
> * Fix seg fault in rx_process
> 
> XMLRPC Character measurement issues with 8PSK modems
> * Update xmlprc Main_get_char_timing() routine. Problem still 
> persist in
> other areas of FLDIGI ie Macro CPS, other xmlrpc commands.
> 
> Gray-mapped 8PSK and soft-decision (2)
> * Upgraded 8psk to Gray mapped constellation
> * Implemented Soft-Decision decoder based on Gray constellation
> * Even when the received phase is distorted by +- 1 phase-position:
> - One of the bits is still known with 100% certianty.
> - Only up to 1 bit can be in error.
> * Increased gain for noisy/weak/HF channels
> 
> View/Hide Smeter (3)
> * Add view/hide Smeter / Power meter
> - configuration saved in progdefaults, requires
> "save config" to keep setting between executions.
> * Reduce minimum width of main dialog to 750 pixels
> 
> CW matched filter
> * Fix to inoperative matched filter
> 
> flarq update
> * flarq changes to bring up to date with the 3.21 maintenance
> branch
> * version 4.3.5
> 
> NOTES:
> (1) Default is to use the SHIFT-mouse-left-click for selection of word. 
> Behavior
> can be changed to allow a SINGLE left click to select word. 
> Previous versions
> allowed a DOUBLE left click. This was changed to provide better 
> touch screen
> behavior.
> (2) 8PSK modem types in this release are NOT compatible with release 3.22.00
> (3) Default is to hide Smeter. Change with menu item:
> View / 'View/Hide Smeter'
> Save configuration to retain setting between execution sessions.
> 
> As of this distribution I will no longer be publishing linux binary 
> files. There are simply too many shared library dependencies to account 
> for. The self help group for fldigi and the other programs has written 
> an excellent set of instructions for building the applications on a 
> number of different Linux, OS X, and Windows platforms. Please refer to 
> the fldigi wiki, https://fedorahosted.org/fldigi/wiki
> 
> Report any problems to one of the three yahoo groups:
> 
> linuxham
> NBEMSham
> win-fldigi
> 
> or directly to me.
> 
> The on-line help has been updated and a new pdf help file published on 
> the http://www.w1hkj.com web site.
> 
> 73, Dave, W1HKJ
> 
> __._,_.___
> Posted by: w1hkj <w1hkj at bellsouth.net>
> Reply via web post <https://groups.yahoo.com/neo/groups/linuxham/conversations/messages/26097;_ylc=X3oDMTJyN25mOGNnBF9TAzk3MzU5NzE0BGdycElkAzE3MjU5ODc2BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAMyNjA5NwRzZWMDZnRyBHNsawNycGx5BHN0aW1lAzE0MTM4OTczMzA-?act=reply&messageNum=26097>	•	Reply to sender <mailto:w1hkj at bellsouth.net?subject=Re%3A%20fldigi%203%2E22%2E01%20release>	•	Reply to group <mailto:linuxham at yahoogroups.com?subject=Re%3A%20fldigi%203%2E22%2E01%20release>	•	Start a New Topic <https://groups.yahoo.com/neo/groups/linuxham/conversations/newtopic;_ylc=X3oDMTJmaTZnaWkyBF9TAzk3MzU5NzE0BGdycElkAzE3MjU5ODc2BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNudHBjBHN0aW1lAzE0MTM4OTczMzA->	•	Messages in this topic <https://groups.yahoo.com/neo/groups/linuxham/conversations/topics/26097;_ylc=X3oDMTM3ZzU1NTBuBF9TAzk3MzU5NzE0BGdycElkAzE3MjU5ODc2BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAMyNjA5NwRzZWMDZnRyBHNsawN2dHBjBHN0aW1lAzE0MTM4OTczMzAEdHBjSWQDMjYwOTc->(1)
> VISIT YOUR GROUP <https://groups.yahoo.com/neo/groups/linuxham/info;_ylc=X3oDMTJmMm1mYXNqBF9TAzk3MzU5NzE0BGdycElkAzE3MjU5ODc2BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzE0MTM4OTczMzA-> New Members <https://groups.yahoo.com/neo/groups/linuxham/members/all;_ylc=X3oDMTJnbWttaDJyBF9TAzk3MzU5NzE0BGdycElkAzE3MjU5ODc2BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2bWJycwRzdGltZQMxNDEzODk3MzMw> 14
>  <https://groups.yahoo.com/neo;_ylc=X3oDMTJlNmVraGk0BF9TAzk3MzU5NzE0BGdycElkAzE3MjU5ODc2BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNnZnAEc3RpbWUDMTQxMzg5NzMzMA-->• Privacy <https://info.yahoo.com/privacy/us/yahoo/groups/details.html> • Unsubscribe <mailto:linuxham-unsubscribe at yahoogroups.com?subject=Unsubscribe> • Terms of Use <https://info.yahoo.com/legal/us/yahoo/utos/terms/> 
> .
>  
> 
> __,_._,___