[Ham-Mac] Aftyer many hours her's the solution

[Kenneth Gilbert]

After many hours here's the solution: 

Use a seperate entry (click the +) for 
5198, 5199, 5200. 
In the Public and Private UDP ports enter 
5198, 5199, 5200. 

You may be able to enter 5198-5200 but haven't tried. 
For the Private IP Address enter the 
IP Address of your computer from the 
Network Prefs. 

Create a fourth entry and enter 5200 
for the Public and Private TCP Port. 
Leave UDP ports blank. 
Enter computer ip address for Private IP Address. 

So I have 4 entries: 
EchoHam 5198 (Public and Private UDP=5198 computer ip address for Private IP Address) 
EchoHam 5199 (Public and Private UDP=5199 computer ip address for Private IP Address) 
EchoHam 5200 (Public and Private UDP=5200 computer ip address for Private IP Address) 
EchoHam TCP 5200 (Public and Private TCP 5200 computer ip address for Private IP Address) 

The UDP 5200 might not be needed. 
One entry with 5198-5200 entered as a port range might work instead of 3 entrees. 

So ideally 2 entries might work: 
UDP 5198-5199 entered for ports. 
TCP 5200 entry. 

Post if you try this. 

Thanks ... Ken