[Ham-Mac] New maintenance release of fldigi and flrig

[w1hkj]

http://www.w1hkj.com/

FLDIGI Version 3.21.15 - Maintenance release

   Log Menu Items
     * Moved menu items in list to prevent careless selection of "New"
     * Added confirmation dialog to create a new logbook

   Macro Editor
     * Changed to be resizable.  Edit and Browser controls change in
       size proportionally.
     * Added Tile object to resizable group.  Allows the text -
       picklist intersection to be dragged for resize.

   WWV xmt mode
     * Added sound card time tick transmit

   Inline macro tags
     * Created ability to delay execution of designated tags
       until the time of occurrence in the transmit character
       stream.  These include:
         - <DTMF    - dual tones
         - <!WPM    - CW words per minute
         - <!POST   - CW post delay
         - <!PRE    - CW pre delay
         - <!RISE   - CW rise/decay time
         - <!MODEM  - change to specified modem
         - <!GOHOME - move to mode sweet spot audio frequency
         - <!GOFREQ - move to a specific audio frequency
         - <!IDLE   - idle for specified number of seconds
         - <!WAIT   - wait for specified number of seconds
         - <!QSY    - move to specifed RF and Audio frequency
       The <! tags use the same parameters as their non delayed
       counterparts
     * Added NULL modem, a device which does not receive
       but can enable transmit.
       - used as modem type before !QSY, !GOFREQ etc to suppress
         transmit of audio stream
       - used with <DTMF... to transmit DTMF tones and suppress any
         other modem audio stream
     * Changed end of transmission logic to MT63 modem to allow it
       to be specified in <!MODEM
     * Corrected string to numeric conversion
     * Added abort processing / queue reset
     * Modified macro parsing to allow multiple
       invocations of macro containing <! tags
     * Added ability to schedule a single macro execution
       at a specifice GMT date and time
       tag format <SKED:hhmm[:YYYYDDMM]>
       where the date defaults to current date.

   RTTY baud
     * Corrected Macro selection of RTTY:45.45
     * Changed status display to show 45.45 vice 45.5

   CW/RTTY init fault
     * Modified transmit code for rtty preamble
     * Added missing stopflag initialization in CW and RTTY modem class

   Log Server lookup
     * Added cty.dat search when connect to log server
       - cty.dat must be installed in the current fldigi files directory

   Control-Z bug fix
     * Fix for seg fault when pressing ctrl-Z immediately after
       double Escape

   CW QSK
     * Discard all pre/post timing if QSK on right channel is disabled

   WEFAX
     Added wefax::adjust_metric method.
     modem::display_metric now sets the member modem::m

=====================================================================
FLRIG Version 1.2.1 - Maintenance release

   TS590 SH/SL/IS mod
     * swapped SH / SL commands for USB-D and LSB-D
       actual data from radio is reverse of the table
       for SH/SL in programmers guide
     * added IS command for CW mode
     * Removed special 590S code from support.cxx
     * Changed bandwidth/center; low/high cutoff controls
         to behave similar to 480HX, 480SAT transceiver

   key fldigi
     * added key_fldigi to saved state

   FTdx5000
     * Copied/modified FT950 class to support the FTdx5000
     * Modified to allow Pout scale image to follow Pout control

   TS480
     * Reversed SL/SH handling of set center/width
       SL - sets/gets bandwidth
       SH - sets/gets center
       SL - sets/gets lower slope
       SH - sets/gets upper slope
     * Corrected set preamp CAT strings
     * Corrected lowest frequency to zero in dsp tables
     * Corrected get IF shift on/off state
     * Added data port selection
     * Corrected missing semicolon terminator in several CAT strings
     * Corrected initialization process for 480 / 590 Kenwood xcvrs
     * Added preamp control to 480 series
     * Enabled swr control on 480 series
     * Added alc control to 480 series
     * Added read menu item 045
     * Added new alternate filter controls dependent on
       menu 045
       - ON  center frequency / bandwidth
       - OFF low / high cutoff frequency
     * Added get_power_out as per TS family of xcvrs
     * Modified get_smeter
     * Modified get_swr

   IC703
     Restored operation of read SWR, ALC, POWER OUT

   Volume restore
     * Inhibited reading xcvr volume control when muted

   IC7000 read notch
     * correction to bcd to notch frequency conversion

   K2
     * enabled reading smeter and power out

73, Dave, W1HKJ