[Ham-Mac] fldigi-3.21.33 posted

[Dick Kriss]

If you are an existing Kenwood TS-590S/fldigi user, you will need to update your fldigi configuration settings to be able to transmit using the new fldigi-3.21.33 version.

Just go to fldigi menu bar Configure, click on Sound Card and under Audio/Right channel options check the box to "Reverse Left/Right channels." Be sure to use the Save Config under the Configure menu item. This will save the updated settings to your fldigi_def.xml file for the next restart.

For some unknown reason Kenwood designed the TS-590S to only transmit on the right channel. Checking the new "Reverse Left/Right channels" box was the only change needed for me to go from fldigi-3.21.32 to fldigi-3.21.33. 

73 Dick AA5VU


Begin forwarded message:

> From: w1hkj <w1hkj at bellsouth.net>
> Subject: [Ham-Mac] fldigi-3.21.33 posted
> Date: December 10, 2011 6:12:01 PM CST
> To: linuxham at yahoogroups.com, NBEMS group <NBEMSham at yahoogroups.com>, win-fldigi at yahoogroups.com, ham-mac <ham-mac at mailman.qth.net>, ham-software at mailman.qth.net
> Reply-To: w1hkj at w1hkj.com, Mac enthusiasts involved in amateur radio applications <ham-mac at mailman.qth.net>
> 
> Maintenance release at
> 
> http://www.w1hkj.com/
> 
> 73, Dave, W1HKJ
> 
> Version 3.21.33 - Maintenance release
> 
>     Right Channel audio
>       * Write silence stream to right channel if not enabled
>       * Added separate tab for right channel configuration items
>       * Replicated right channel control items on the new tab.
>         Original controls on PTT, CW and RTTY tabs or the
>         replicants may be toggled to control right channel
>         operation
>       * Added check button to enable reversal of left-right audio
>         channels
> 
>     WEFAX update
>       * When changing wefax slant, prompts to save configuration on exit.
>       * Changed wefaxNNN to wefaxNNN_modem
>       * Changed sample rate initialization
>       * Fixed prototype for wefax::getfile
>       * Fixed logging of fax images.
> 
>     Modem class update
>       * get_xxx methods declared const where appropriate
>       * Simple get_xxx methods inlined for better performances and 
> smaller code.
> 
>     QsoRec comparisons
>       * Added cQsoRec::setDateTime and setFrequency with specific format.
>       * compareTimes, compareDates and compareModes twice faster.
> 
>     WARN status colors
>       * Added user selectable colors for level indicator (diamond below wf)
>         - Low    - nominal BLACK, signal < 0.05
>         - Normal - nominal GREEN, 0.05 <= signal < 0.9
>         - High   - nominal YELLOW, 0.9 <= 0.9 < 0.98
>         - Over   - nominal RED, signal >= 0.98
>         signal is the peak audio value % of maximium for the sound
>         card in use.
>       * Note that this level is for the composite of all signals within the
>         passband and not just for signal being decoded.
> 
> ______________________________________________________________
> Ham-Mac mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ham-mac
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Ham-Mac at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html