[Ham-Mac] [linuxham] Mac fldigi CAT Control for TS-940S

[Dick Kriss]

Dino,

I am not sure but part of the rig control issue could
be that you are using the older Mac OS X 10.4 (Tiger)
rather than the current 10.5.8 (Leopard).  Maybe
some Tiger fldig users will respond.

Since there is no RigCAT TS-940S.xml file to download,
you may want to try again using the Hamlib. I know you
have tried both with no joy.  Your rig is listed in the fldigi
Hamlib rig selector.

I don't own a microHam Digikeyer so I cannot help.

Good luck!

Dick AA5VU


On Sunday8/16/09 7:11 PM, "Dino Papas, KLØS" <kl0s at cox.net> wrote:

> 
> I'm having no luck at all getting Mac fldigi to establish rig control
> over my TS-940S via my microHam Digikeyer.
> 
> On the PC:
> 
> --Works fine with fldigi under CAT control and the TS-440S .xml
> configuration from my PC thru the DigiKeyer.
> 
> On the Mac:
> 
> --Works fine with MacLoggerDX thru the DigiKeyer
> --Works fine with cocoaModem thru the DigiKeyer (obviously no rig
> control here)
> --There is no TS-940S .xml file under CAT so I'm trying to use the
> TS-440S file here since it works over on the PC side and setting the
> configuration to mirror the PC settings; there is a TS-940S selection
> under Hamlib but that route doesn't work either.
> 
> Chen W7AY's uH Router does the interfacing on the Mac side;
> microHam's Router utility on the PC side.
> 
> So I'm convinced there's something about Mac fldigi that just isn't
> right here since the other applications all work ok.
> 
> Any suggestions?
> 
> Thanks in advance.
> 
> 73 -- Dino KL0S
> 
>