[Ham-Mac] Mac fldigi CAT Control for TS-940S

[Dick Kriss]

Dino,

I have never been able to get the fldigi RigCAT to work with
my iMac and Kenwood setup; however, the Hamlib works
great.  You don't need RigCAT if Hamlib works.

I just tried the latest version fldigi-3.12.4 and still no joy
with RigCAT. 

Try using Hamlib and see what happens. Your TS-940 is
shown as one of Hamlib options in the rig selector.

73 Dick AA5VU



On Sunday8/16/09 7:11 PM, "Dino Papas, KLØS" <kl0s at cox.net> wrote:

> I'm having no luck at all getting Mac fldigi to establish rig control
> over my TS-940S via my microHam Digikeyer.
> 
> On the PC:
> 
> --Works fine with fldigi under CAT control and the TS-440S .xml
> configuration from my PC thru the DigiKeyer.
> 
> On the Mac:
> 
> --Works fine with MacLoggerDX thru the DigiKeyer
> --Works fine with cocoaModem thru the DigiKeyer (obviously no rig
> control here)
> --There is no TS-940S .xml file under CAT so I'm trying to use the
> TS-440S file here since it works over on the PC side and setting the
> configuration to mirror the PC settings; there is a TS-940S selection
> under Hamlib but that route doesn't work either.
> 
> Chen W7AY's uH Router does the interfacing on the Mac side;
> microHam's Router utility on the PC side.
> 
> So I'm convinced there's something about Mac fldigi that just isn't
> right here since the other applications all work ok.
> 
> Any suggestions?
> 
> Thanks in advance.
> 
> 73 -- Dino KL0S
> 
> ______________________________________________________________
> Ham-Mac mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ham-mac
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Ham-Mac at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html