[Ham-Mac] Stuck Audio Input Level slider using the USB Audio CODEC input

[Dick Kriss]

I could use some help from Mac cocoaModem users with the SignaLink USB Sound
Card interface. 

The problem is my cocoaModem "Audio Input Level" slider is stuck at -24 db
and when I try to move it toward the 0 db setting, it jumps back to -24 db.
At first I though I had a bad or corrupted w7ay.cocoaModem 2.0.plist file so
I trashed it and started over clean.  As expected the Audio Input Level
slider was at the 0 db default setting. I then went to the CONFIG panel and
clicked Activate and selected the USB Audio CODEC and the slider jumped over
the the -24 db setting.  At this point I lost control of the slider.

At this point I don't know if there is a problem with my settings or the USB
Audio CODEC interface.  The slider works FB with other input options so you
will not see this issue with the SL-1 or SL-1+ interface units.

I look forward to feedback from other Mac users running the SignaLink USB
device so I can figure out what I am doing wrong to have lost control of the
Audio Input Level slider.

73 Dick AA5VU