Fwd: [Ham-Mac] SignaLink SL-1+, PRO III - PSK - Transmit

[Richard Hemingway]

Hi Steve,

Thanks for the reply.  I have posted what I found out when I talked 
with Tigertronics.  I had the volume cranked up all the way in both 
the System Preferences and in the software.  I still thinik that is 
was some kind of operator error.  But with the power out, I think I 
now have a different problem also. I had the balance in the middle, 
didn't have a chance to try it on the left before I noticed that the 
power red light was out.

73, Dick, N5XRD




>I agree this is the way to test/set CocoaModem  audio level as 
>controls the sound output level itself.  I bring config screen up 
>and also System preference sound control screen up as well.
>
>Check in the sound control in the System Preferences make sure you 
>don't have all your audio coming out of just the right side.
>CocoaModem is stereo aware in that you can have two choices of 
>inputs  (L/R side).  Problem could be your config in CocoaModem uses 
>Left.  Yet your System setting says balance is too the right. 
>Result is no or too low audio.
>
>Hope you find the solution.  I am on iMac Intel and it does work for me.
>
>73
>Steve - VA3SPH