[Ham-Mac] Subject:,You cannot open this application ... because, it is not suppotrted on this system

[Bob]

Subject:
You cannot open this application ... because, it is not supported on 
this system
From:
Bob <bobsmacbox at optonline.net>
Date:
Sun, 18 Jun 2006 13:43:13 -0400

To:
ham-mac at mailman.qth.net


Here is my set up
>   Machine Name:    Mac mini
>   Machine Model:    Macmini1,1
>   CPU Type:    Intel Core Solo
>   Number Of Cores:    1
>   CPU Speed:    1.5 GHz
>   Memory:    512 MB
>   Bus Speed:    667 MHz
>   Boot ROM Version:    MM11.004B.B00
>   Serial Number:    YM608UADU35
>   SMC Version:    1.3f4
>   L2 Cache:    2 MB
>
One of the most recent programs I tried is MacIcomControl 1.0.0. the 
Kind is Application (Classic) it was copyrighted in 1995.

kg2rp/Bob
----------------------------------------------------------------------

Message: 1
Date: Thu, 15 Jun 2006 07:36:23 -0400
From: Steve Hellyer <shellyer at sympatico.ca>
Subject: Re: [Ham-Mac] "You cannot open this application ... because
   it is not    supported on this system"
To: Mac enthusiasts involved in amateur radio applications
   <ham-mac at mailman.qth.net>
Message-ID: <F3F42E3C-E002-42ED-9850-4BEC3C817FB8 at sympatico.ca>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

Hi Bob,

I think IcomControl is a Mac OS 9 application not an Mac OS X  application.

Tell us more about your setup so that we can help...
Which Mac Mini do you have? Go to the Apple menu in the top left and  
select the "About this Macintosh". What does that that window say? OS  
version. Processor etc...  Which Icom are you wanting to control?

Steve
VA3SPH

On 15-Jun-06, at 1:40 AM, Bob wrote:

 > > I have a mac mini. I have been trying to run a number of ham  > > 
programs. When I try to open them I get the message that "You  > > 
cannot open this application ... because it is not supported on  > > 
this system".  The mini runs Mac OS X version 10.4.6.
 > >
 > > The most recent programs I have tried is IcomControl,
 > >
 > > kg2rp