[Ham-Mac] Griffin iMic

[Dick Kriss, AA5VU]

Lon, 

Looks like we are in the same boat. I have tried and cannot find a 13-Pin
A/B switch.  BuxCom used to make one but dropped the product.  To change I
have to pull the TS-570 out of the cabinet and swap 13 Pin cables. I have
one cable that goes to the SL-1 interface box and another cable that goes to
the PK-232 for FSK operation.  A 13-Pin DINN A/B switch would be nice.

Dick,, AA5VU


On 3/1/05 5:18 PM, "Lon Kinley" <majorlk at us.net> wrote:

> Dick,
> 
> << Please let me know how your TS-570 hears with the iMic.>>
> 
> I have had all the stuff to get connected for several months,
> including the MicroHAM control interface but just haven't taken the
> time to put it all together.
> 
> I have been struggling with how to run VHF packet/HF AMTOR with my
> PK232 and still use the 570 for digital HF. I have about decided I'm
> going to have to use a old PB175 (Powerbook) for packet and AMTOR and
> my G4 with everything else.
> 
> I will either have to make up a second ACC2 cable and have one for
> each setup and switch them as necessary, or try to run the audio I/O
> to both the iMic and PK232 at the same time. Something tells me I'm
> asking for trouble with that one. OR bring the Audio I/O to a switch
> and the  to the TNC or iMic.
> 
> I never can seem to find and easy way to do things. :)
> 
> Lon
> 
> _______________________________________________
> Ham-Mac mailing list
> Ham-Mac at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/ham-mac