[Ham-Mac] Classic Mode Crash w/Sys 10.1.5
Tim McLeod
[email protected]
Wed, 11 Sep 2002 06:03:04 -0400
Bruce,
Classic is not OS 9. I see a lot of memory problems with multiple programs
running in Classic mode. This could be deadly for your database! There are
also some file locking problems that were cleared up in Jaguar which may be
part of your problem.
HTH - Tim
----- Original Message -----
From: <[email protected]>
To: <[email protected]>; <[email protected]>
Sent: Tuesday, September 10, 2002 8:44 AM
Subject: [Ham-Mac] Classic Mode Crash w/Sys 10.1.5
> This is a very strange problem. I am using a new iMac G4 800 MHz LCD
and
> system X with Sys 9.2 in background with a few programs on it. Sys X is
> mostly used on Internet, a large database is on with Sys 9.2, run 3
Browsers
> because of problem, IE, NS, AOL all latest versions. The database is 6
MB
> of data, all is kept in RAM when it runs, it is always on even when not in
> use.
> After about a days use IE is affected 1st, and if more then one
window
> is open under IE(Browser of choice) when you switch windows IE suddenly
shuts
> down. As time goes on IE will quit every time the second window is open
and
> switch between the 2 occurs....IE shuts down even faster if 3 or 4 IE
windows
> are open.
> Some of the other programs running will also suddenly shut down,
> including the database(Panorama) in same fashion when used with more then
one
> window.
> In addition the HD eventually gets corrupted and even will not
recognize
> my password. Eventually, although not at first, a HD error will show and
it
> must be repaired with disk 1st aid. A new password must be chosen to
even
> start the iMac.
> Apple service has been great and very cooperative. Apple has
replaced
> the mother board, HD, memory, AC line input filter assembly, power
> cord....all except Harness, LCD screen and PS.
> It still happens, have not called Apple back yet.
> I have reached the conclusion the database, which works perfectly in
> Classic Mode is somehow causing the corruption of the HD data.
> Has anyone had similar problems, I am (almost) too embarrassed to
call
> Apple.
>
> Tnx and 73, Bruce K2RTH
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> Ham-Mac mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/ham-mac