[Ham-Mac] Net/mac tcpIP router?

[James Nedbalek]

>The Version of my NET/Mac can provide a MacIP-address on the ethernet.
>so I can telnet from any other computer to my own ip (see above), but I
>can not reach any other computer routed to the ax25 part of the net.
>

>Has anyone setup a router with NET/Mac?
>Is there a newe version then my 2.3.71 for hte mac?

If you are trying to telnet or ftp from another machine on your LAN 
through NET/Mac, yes it is possible.  However NET/Mac doesn't seem to 
work if the LAN machine uses Open Transport although will admit I haven't 
tried with 2.3.71.  It does work fine with the old MacTCP.  If you can 
use MacTCP you will need to assign static addresses to your LAN machines.

Set the Gateway address in MacTCP to the same as your NET/Mac computer 
(44.130.52.164) in your case.

===========================================================================

 James Nedbalek          nedbalek@winternet.com       Minneapolis, MN USA
        Macintosh/Apple Systems and Software development since 1982.
 Phone (952) 934-8317                  http://www.winternet.com/~nedbalek
===========================================================================