[Ham-Computers] Change User Name & Password in Router Settings: Is it more Secure?

[nn6o.lists at pacbell.net]

Ray (et al),


I was wondering if you still get the error message when running netsh - I also run into the same message while testing "netsh int ip show addr" on one of three Windows XP systems (the other two properly returned the current IP addresses).  At first, I thought "show addr" might not be available jn XP (as the error popped up on the first system I tested on).  But on the other two systems, it worked fine.  If you can, please also try the following:


  netsh int ip show config


This worked on all three XP systems I tested.  The results are similar, but "show config" might also show outdated IP info if the NIC is currently not connected to a network.



  - Aaron, NN6O





Sent from Outlook Mobile



From: nn6o

Sent: Tuesday, April 5, 7:51 PM

Subject: Re: [Ham-Computers] Change User Name & Password in Router Settings:Is it more Secure?

To: Computers (or other) used for amateur radio, communications, or experimenting


*** snip ***