[Ham-Computers] New router problems

[WA5CAB at cs.com]

Dean,

You should be able to log into the router and look for things like status 
of the DHCP server, etc.  

In a message dated 11/30/2010 6:16:04 PM Central Standard Time, 
madsanders at wildblue.net writes: 
> 
> I don't know if I have DHCP or not.The router came with a USB flash drive
> called the "Easy Setup Key" which is used in conjunction with a program
> called "Cisco Connect". This  Easy Setup Key plugs into each computer to 
> be
> added to the Valet.  The software does all the work. So,  I'm not certain
> what I have.
> 
> On Tue, Nov 30, 2010 at 4:29 PM, Dale Miller <stpatrick2 at twlakes.net> 
> wrote:
> 
> >On 11/30/2010 11:15 AM, DEAN SANDERS wrote:
> >>HI Dale,
> >>Thanks for the comeback. An ethernet cable runs from the desktop 
> computer
> >to
> >>an ethernet port on the router. Then the router is attached to the
> >Satellite
> >>modem via another ethernet cable.
> >>Dean
> >>
> >>
> >
> >Are you using the router as a DHCP server?
> >If not you could have an IP conflict which can cause problems too.
> >
> >
> >--
> >All the Best&  73's
> >Dale Miller, KC2CBD
> 

Robert & Susan Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480