[Ham-Computers] Dual boot problem
Loren Moline WA7SKT
lmoline at hotmail.com
Sat Nov 6 16:00:30 EDT 2010
Gene,
If I remember right Windows will not recognize a SATA drive unless one of 2 things are done. You must either specify native drive in bios or use a boot device to install a driver in the boot sector for the SATA drive. Someone please correct me if I am wrong.
Loren WA7SKT
Member: ARRL and Pacific Northwest VHF Society
Member: Hearsat Satellite Monitoring Group ( www.hearsat.org )
Location: CN86cx
> From: erastber at tampabay.rr.com
> To: ham-computers at mailman.qth.net
> Date: Sat, 6 Nov 2010 14:03:08 -0400
> Subject: [Ham-Computers] Dual boot problem
>
> I have been trying for over a week now to set up a dual boot system on the new HP 6318f.
>
> The biggest problem is that when I add the second SATA HDD I can not boot to that drive unless I change the bios setting from AHCI to IDE; and when I do that, the original SATA drive will not boot because the bios is set to IDE.
>
> I can however, use the second drive as a stand-alone drive (on IDE), with XP installed and boot to XP normally but then I can not use the original drive with Win7. (Hope that made sense!)
>
> Bottom line is HOW do I add the second drive and use it on AHCI ????
>
> I am starting to think that Win 7 is a piece of CRAP!
>
> Any help will be greatly appreciated.
>
> 73,
>
> Gene, WØQFC
>
> Gene, WØQFC
> Spring Hill FL
> Lafayette Lodge #91 A.F. & A.M.
> ______________________________________________________________
> Ham-Computers mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ham-computers
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Ham-Computers at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Ham-Computers
mailing list