[Ham-Computers] help identifying a connector

[Lu]

I have some good quality coax lengths with an unknown connector on each end.
It is similar to an N-male connector, but the center of the connector is a
hollow cylinder, not a sharp pin.  I was told this might be a "Reverse
Polarity TNC" connector as is used in WiFi systems.  Here's a photo (not the
sharpest, sorry)
http://www.qsl.net/n2sln/Nconnector.JPG
I was told that these were pulled from an 802.11a system on 5 GHz.


Thanks,

Lu
N2SLN