[Ham-Computers] Multiple displays?

[Philip (KO6BB)]

Thank you Mike,
As I mentioned in my reply to Jeff and so won't repeat it, it's working very 
well.

As to real estate, the main monitor is where it's always been, to the left 
of my FT-2000.  I put the secondary one on the shelf above, and to the right 
of the main one.  With all the work I do I should have done this a long time 
ago.

73 de Phil,  KO6BB
http://ko6bb1.multiply.com/
http://members.lycos.co.uk/ko6bb/

DX begins at the noise floor!
RADIO/Antennas: Yaesu FT-2000, Two Modified Mini-whips.
Homebrewed 6Hz Filter, Modified MFJ-1040C Pre-Amplifier.
Merced, Central California, 37.3N 120.48W  CM97sh


----- Original Message ----- 
From: "Mike Besemer (WM4B)" <mwbesemer at cox.net>


> Phil,
>
> Go for it!  I've had 2 monitors at work with (at times) much less computer
> than you have and it's a HUGE benefit.  It sounds like you're all set with
> the hardware you have... just plug and play.  I'm wanting to do the same
> thing on the main shack computer here, but don't have the real estate to
> spare on the desk.
>
> Good luck!
>
> 73,
>
> Mike
> WM4B