[Ham-Computers] 241A

Fri, 20 Sep 2002 11:52:19 -0500

Sure can.
TM241A--Kenwood
1. Remove the top and bottom covers from the transciever.
2. Remove the knobs from the front panel.
3. Remove the nut from the mic jack and the nut from the channel
selector switch.
4. Remove the 4 screws that secure the front panel to the body of the
transceiver
5. Pull the front panel off the transceiver to expose the Control board.
6. Remove the 3 screws from the Control board. Gently pull the board off
the transceiver.
Lithium battery is behind control panel

NOW, do you know the voltage of the battery???
Thank you for part no.
73
Ben  KC5NOP

********************************
----- Original Message -----
From: "DGB" <[email protected]>
To: <[email protected]>
Sent: Friday, September 20, 2002 11:50 AM
Subject: Re: [Ham-Computers] 241A

> Kenwood part nr. W09-0326-05 and if you order it fm Pacific Coast
Parts, add
> a K in front of the part number.
>
> Where at in the radio is the battery? I'll be getting a friend's radio
to
> replace that in and knowing the location would be helpful!
>
> 73 de W9YQ
>
>
> ----- Original Message -----
> From: "Ben Coleman" <[email protected]>
> To: "ham-computers @mailman.qth.net" <[email protected]>
> Sent: Friday, September 20, 2002 7:20 AM
> Subject: [Ham-Computers] 241A
>
>
> > O.K., found the battery---no markings. Anyone have any suggestions?
Am
> > considering contacting Kenwood for replacement battery. Need an
address
> > for Kenwood Parts (email or web site)? Anyone had any experience
with
> > Kenwood?
> > Also, someone mentioned "Tadiran"--???
> > Any help would be appreciated
> > 73
> > Ben KC5NOP
> >
> > _______________________________________________
> > Ham-Computers mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/ham-computers
> >
>
> _______________________________________________
> Ham-Computers mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/ham-computers
>