[Hallicrafters] FW: 100KC Crystal

hwhall at compuserve.com hwhall at compuserve.com
Tue Nov 12 19:10:21 EST 2019


Yes, I'm pretty sure I do but what physical form do you need or can use?  Eg., wire leads, HC-6, FT-243 or whatever.

WayneWB4OGM

-----Original Message-----
From: Gary H. Harmon, Jr. <gharmon at idworld.net>
To: hallicrafters <hallicrafters at mailman.qth.net>
Sent: Tue, Nov 12, 2019 8:37 am
Subject: [Hallicrafters] FW: 100KC Crystal

Does anyone have one excess to their needs or a replacement suggestion?

 

Best 73,

 

Gary H. Harmon, Jr. - K5JWK - HAM Radio, HEATHKIT, and ATARI Archaeologist

6003 Archwood

San Antonio, TX 78239-1504

(210) 657-1549 <home>

(210) 884-6926 <cell and text>

(210) 657-1549 <FAX with prior notification>

gharmon at idworld.net

 

"Retirement = Every day is a Saturday except Sunday"

"Real radios glow in the dark"

"Too many projects, not enough time"

 

http://www.grissomroadcoc.org

 

From: reisenbrey at satx.rr.com [mailto:reisenbrey at satx.rr.com] 
Sent: Tuesday, November 12, 2019 9:25 AM
To: 'Gary H. Harmon, Jr.'
Subject: 100KC Crystal

 

Gary:

 

This is the crystal for the crystal calibrator in the SX-117. (Probably
other Hallicrafter models as well).  It is marked:  Northern Engineering
Laboratories, Burlington, Wisconsin.  T-9E  100KC.  It is also marked
019-202351 which I believe to be the Hallicrafters number.  It is built in a
glass envelop with an 8 pin octal  base.

 

I doubt I will ever find an exact replacement but you never know so please
keep your eyes open.  It will be possible I believe to substitute a normal
Heathkit (or similar) crystal into an 8 pin base and make the calibrator
work without a whole lot of trouble.  The issue with this approach is that
the 8 pin socket on the calibrator chassis uses almost every pin connection
for wiring hookups inside the calibrator chassis.  Would need to determine
which two pins in the 8 pin crystal base are actually used for the crystal,
and of course no clues in the schematic as to pin numbers.  In fact, the 8
pin connector is not even shown on the schematic!  

Ron

 

 

______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Hallicrafters at mailman.qth.net

List Administrator: Gary Harmon, K5JWK
** For Assistance: gharmon at idworld.net **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


More information about the Hallicrafters mailing list