[Hallicrafters] Tube Shields.

[hwhall at compuserve.com]

What types/sizes?

 

 Wayne
WB4OGM

 

-----Original Message-----
From: Tom - Vintage Radio <radio at daileyservices.com>
To: hallicrafters <hallicrafters at mailman.qth.net>
Sent: Sat, May 12, 2018 6:47 pm
Subject: [Hallicrafters] Tube Shields.

If anybody out there, has the IEC tube-shields as used in R-390s and many
Heathkit stereo amplifiers, I need some... they are the BEST... about 48%
less retained heat, than the bayonet or slide-down type.  Some of the best
"home brew" ones I made, were constructed of copper-screen wire, with edges
soldered together... they shield WONDERFULLY, and do NOT retain heat.

ELECTRIC RADIO magazine had an article on them... seems like last month.

Tom - WØEAJ

______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Hallicrafters at mailman.qth.net

List Administrator: Gary Harmon, K5JWK
** For Assistance: gharmon at idworld.net **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html