[Hallicrafters] Speaker for SX-62A

[Langston, Mike]

The R-46 is 600 ohms impedance. But, you can bypass the impedance transformer and connect directly to the speaker voice coil for about 4 ohms. The speaker cabinets are identical except for the "A". I use my R-46 with a RAL-7, the R-46A with an SX-96 and the R-46B with an SX-101A and SX-115.

Good luck,
Mike KL7CD

Sent from my iPhone

> On Nov 7, 2016, at 8:36 PM, Waldo Magnuson <magnuson at mac.com> wrote:
> 
> Hi,  I got my dial cord restrung and all seems to be working fine.  My plan is to display and use the SX-62A in my front room on a table.  I have a few Hallicrafter speakers but not a R-46 or R-46A which Dachis states is the matching speaker for the SX-62A (the A, which mine is, has an 3.2 ohm output and the R-46A speaker is 3.2 ohms also). I would like to exhibit the "correct" matched pair. So does anyone have a R-46 or R-46A speaker they could part with? Thanks..
> Skip Magnuson W7WGM
> Spokane, WA
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html