[Hallicrafters] SX-62 Sensitivity capacitor

[Asif Khan via Hallicrafters]

 The .22uF in parallel with the 100uF (yes that value is correct) across the sensitivity pot  was also used in all of the SX-42 receivers except the really early ones.
Nick


 

 

-----Original Message-----
From: Richard Knoppow <1oldlens1 at ix.netcom.com>
To: hallicrafters <hallicrafters at mailman.qth.net>
Sent: Wed, Mar 25, 2015 11:02 pm
Subject: Re: [Hallicrafters] SX-62 Sensitivity capacitor


Do you mean 100 uf or uuf (pf)?   If the latter sometimes small 
caps were put
in parallel with larger ones to insure bypassing at high 
frequencies.

On
3/25/2015 8:24 PM, Waldo Magnuson wrote:
> Hi,
>    I'm trying to straighten
out a somewhat hacked SX-62 and have a 
> question about the Sensitivity
Control bypass capacitor value.  My 
> schematic shows 0.22 uf (C24) but in
both SX-62s I have (I have 2) 
> there has been a 100 uf capacitor plus the
0.22.  Has there been a 
> suggested modification to the C24 value? Thanks.
>
Skip W7WGM
> ______________________________________________________________
>
Hallicrafters mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help:
http://mailman.qth.net/mmfaq.htm
> Post:
mailto:Hallicrafters at mailman.qth.net
>
> List Administrator: Duane Fischer,
W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted
by: http://www.qsl.net
> Please help support this email list:
http://www.qsl.net/donate.html
>

-- 
Richard
Knoppow
1oldlens1 at ix.netcom.com
WB6KBL

______________________________________________________________
Hallicrafters
mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help:
http://mailman.qth.net/mmfaq.htm
Post:
mailto:Hallicrafters at mailman.qth.net

List Administrator: Duane Fischer,
W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by:
http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html