[Hallicrafters] Need Help With SX-101 USB Problem

[Jim Liles]

Hi Roy,

Yes, the crystals are under the sub chassis --- a pita.  Haven’t found a bad crystal --- always the adjustment or something else pretty much covered by Wayne.  As long as you divulged working on the SX-88, I have some questions.  I’ll start another thread so as not to hijack this one.  Cya there.

Kindest regards Jim K9AXN    

-----Original Message----- 
From: Roy Morgan 
Sent: Thursday, July 16, 2015 6:07 PM 
To: Hallicrafters 
Subject: Re: [Hallicrafters] Need Help With SX-101 USB Problem 


On Jul 16, 2015, at 10:42 AM, Jim Liles <hallicrafterssr2000 at k9axn.com> wrote:

> Well thought out advice Wayne.  Regards Jim K9AXN
> ...
> This step is for the not-too-weak... swap the two crystals (temporarily) and see if the baulky crystal startup moves with the 1700kc crystal 

I was about to raise an alarm that the crystals are hidden underneath the second mixer sub chassis (which is a BEAR to remove) BUT:

I think it was at the SX-88 that I worked on.

Are the crystals in sockets on the top of the sub chassis in the SX-101??

Roy

Roy Morgan
k1lky68 at gmail.com
K1LKY Since 1958

______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Hallicrafters at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html