[Hallicrafters] Need Help With SX-101 USB Problem

[Jack]

This. DeOxit on the selector switch will get you back in the game



-----Original Message-----
From: Hallicrafters [mailto:hallicrafters-bounces at mailman.qth.net] On Behalf Of rbethman
Sent: Wednesday, July 15, 2015 5:43 PM
To: hallicrafters at mailman.qth.net
Subject: Re: [Hallicrafters] Need Help With SX-101 USB Problem

Richard,

You have switch contacts that need to be cleaned.

Either use some TV tuner cleaner, carefully!  Or you, once again, carefully, get some DeOxit Fader Lube.

It is going to be a real PIA!  You may even have crystal socket crud.

Best of luck!  Most of us have been through this with all the old receivers and transmitters.

Regards, Bob - N0DGN



On 7/15/2015 5:07 PM, richard wrote:
> Hello.
> Have a SX-101 that  when I go from USB to LSB & then want to go back to USB it is Dead but if I pull the 12AT7 tube out & put it
back in then the receive in USB comes back on or if I turn the on & off many times then the USB receive comes back on yet the LSB
never goes out.. Any body have this problem & if you fixed it can you tell me how? I have even put a small fan inside & that does
nothing .
> Thanks Much
>   Richard

______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Hallicrafters at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html