[Hallicrafters] Need Help With SX-101 USB Problem

[Jim Liles]

Richard,

Look at the alignment instructions specifically the USB and LSB oscillator 
adjustment.  It talks to the adjustment so that it will start reliably.

Kindest regards Jim K9AXN

-----Original Message----- 
From: richard
Sent: Wednesday, July 15, 2015 4:07 PM
To: Hallicrafters at mailman.qth.net
Subject: [Hallicrafters] Need Help With SX-101 USB Problem

Hello.
Have a SX-101 that  when I go from USB to LSB & then want to go back to USB 
it is Dead but if I pull the 12AT7 tube out & put it back in then the 
receive in USB comes back on or if I turn the on & off many times then the 
USB receive comes back on yet the LSB never goes out.. Any body have this 
problem & if you fixed it can you tell me how? I have even put a small fan 
inside & that does nothing .
Thanks Much
Richard

Richard Morris
______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Hallicrafters at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html