[Hallicrafters] SX-115 and HT-32B question

[rbethman]

The HT-32s only do about 15 to 20W AM(DSB).

If you push it to the wall, it WILL distort the audio.

SSB will do 100 - 120W.  normal.

Regards, Bob - N0DGN


On 2/14/2015 4:35 PM, Jim Liles wrote:
> Hi Lee,
>
> Valentines day so tomorrows the day.  For the band pass problem I have an answer but need to collect my notes from 1971.  Had some correspondence with the Hal guys regarding the SX-115 that addresses this issue including a fix.  Have to articulate it properly or the nut cases will need a sedative.  Also need to roll it by the reflectors if you don’t mind.
>
> Kindest regards Jim K9AXN
>
> -----Original Message-----
> From: kc9cdt at aol.com
> Sent: Saturday, February 14, 2015 10:59 AM
> To: hallicrafterssr2000 at k9axn.com
> Subject: SX-115 and HT-32B question
>
>
> Jim,
> Today I am having a ball with  my SX-115/HT32-B.
>
> A question please for each:
>
> SX-115 seems to hear USB and LSB ...example...on 40 Mtrs, tune in a nice signal on LSB, without touching dial, change to USB...I can still hear the signal fine even though it is not as loud?? Problem or just alignment?
>
> HT-32B tune up on 80M 3820, DSB or CW... max carrier out is 15 watts, BUT on SSB 120 watts peak out while talking loud or whistling?? Alignment?
>
> Thanks,
> 73,
> Lee
>
> Lee Simmonds
> Summit DCS LLC
>
> 260-799-4077 Office
> 260-403-6936 Cell