[Hallicrafters] Aligning a S-76

[Ken And Susan Hittson via Hallicrafters]

Hi Charlie
I have been procrastinating on the doghouse. I see two shielded leads and a couple of cloth wires to be disconnected to get it off. But I can't put it off any longer.
The alignment part is the thing that is baffling me. If I do not use a .01ufd cap between the sig gen and the pin 1 of the if can, (even though the manual does not describe that) I am connecting to 275vdc, and certainly going to burn something up. I am injecting 50kc unmodulated signal, but get no speaker output. I do at 1500kc, and at all of the dial calibrations. 
Thanks Ken



> On Aug 7, 2015, at 12:58 PM, Charlie T, K3ICH <pincon at erols.com> wrote:
> 
> Have you replaced the caps inside the little top-of-chassis converter box?
> 
> I found most of them leaky as well as a couple WAY out of spec resistors.
> 
> 73, Charlie k3ICH
> 
> 
> -----Original Message-----
> From: Hallicrafters [mailto:hallicrafters-bounces at mailman.qth.net] On Behalf Of kenneth hittson via Hallicrafters
> Sent: Friday, August 07, 2015 1:44 PM
> To: Chris Farley <kc9ieq at yahoo.com>; Ken And Susan Hittson via Hallicrafters <hallicrafters at mailman.qth.net>
> Subject: Re: [Hallicrafters] Aligning a S-76
> 
> Chris
> Yes, sorry 50khz.
> Thanks
> Ken
> 
> -----Original Message-----
> From: "Chris Farley via Hallicrafters" <hallicrafters at mailman.qth.net>
> Sent: ‎8/‎7/‎2015 10:21 AM
> To: "Ken And Susan Hittson via Hallicrafters" <hallicrafters at mailman.qth.net>
> Subject: Re: [Hallicrafters] Aligning a S-76
> 
> 
> 
> Hopefully just a typo, but..   You mean 50kHz not 50Hz, right?
> 
> 
> 
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html