[Hallicrafters] Aligning a S-76

[Chris Farley via Hallicrafters]

Hopefully just a typo, but..   You mean 50kHz not 50Hz, right?


Sent from my SMRTphone

-------- Original message --------
From: Ken And Susan Hittson via Hallicrafters <hallicrafters at mailman.qth.net> 
Date: 08/07/2015  12:23 AM  (GMT-06:00) 
To: Hallicrafters at mailman.qth.net 
Subject: [Hallicrafters] Aligning a S-76 

Hi All
I am working on an S-76, which belongs to an old friend who has owned the radio since we were kids. I have recapped it, and replaced a couple of tubes which tested weak. Now I'm trying to align it, and am stuck on the 50hz if. I am using a .01 cap to isolate pin 1 of the 50hz if can (L6 on the Hallicrafters schematic), and cannot seem to get an unmodulated signal through. There is about 270vdc on that pin, so I have to couple to it through some method. Any advice is appreciated. 
Ken
Ft Smith AR.  


______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Hallicrafters at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html