[Hallicrafters] SX-100 MK2

[lrlayton at cox.net]

Digi-Key has in stock  a 10K reverse log taper pot, part # KB1031S28-ND.  I have used these as a replacement RF gain pot on a couple of Hallicrafters models and they work fine.

Les Layton


---- "David C. Hallam" <dhallam at knology.net> wrote: 
> I have a SX-100 MK2 on the bench right now after replacing some bad 
> capacitors and resistors.  I was just getting ready to start alignment 
> and reviewing some of the old notes gleaned from various reflectors and 
> supplied courtesy of Roy K1LKY.  I ran across a little gem I wasn't 
> aware of.  There is a note stating the RF gain pot which I am taking to 
> be the sensitivity pot is a reverse log taper pot.  Is that correct?  I 
> have to replace the one in mine and used a normal linear taper pot.
> 
> David
> KW4DH
> 
> -- 
> "I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them."
> Thomas Jefferson
> 
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html