[Hallicrafters] Transformer specs for HT-30

[Robert Sauvan]

Hi all,
I am in great need of the specs  for the transformer for my HT-30 that I 
am rebuilding. I have run up against a number of obstacles trying to get 
a transformer for this thing. I was informed by Gary WZ1M that the 
transformer I took out of my newly acquired Ht-30 was not a replacement 
and wouldnt work in my radio by itself. This explained why the previous 
owner had an external power supply along with this transformer to power 
the rig. I have not been able to find a used or replacement transformer 
so now I am looking to get one wound custom. My problem is that I am 
unable to figure out from the schematic what specs I actually need to 
provide to the transformer guy so I can get one built. What I believe 
from the schematic is this:

Secondaries:  1-6.3v tap    amps needed?
                         2- 5v taps    amps needed?
                         1-430 v tap    amps needed?
                         1-600v tap       amps needed?
                         Bias tap- volts and amps needed?

The Ht-32, 32A and 32B radios all seem to have 300 amps on high voltage 
taps, 11 amps on the 6.3 v tap and 3 amps on the 5v taps. I dont want to 
assume anything since this transformer seems to be very "unique" but 
maybe the HT-30 could be the same? I am still unsure what the Bias tap 
ratings should be.
I would love to hear from any of you with tons more knowledge than I 
have and any of you that do have one of these rigs if you would be able 
to provide the info for me.

Thanks-Bob-W0YBS